|
|
FEATURES: |
|
NSF rated 61 second cycle.
(54 racks per hour) |
|
Only uses
0.96 gallon of water per rack |
|
Upper and lower rotating
wash
and rinse arms |
|
Built-In final
rinse booster heater (optional) Supplies 180 degree water |
|
Heavy-Duty industrial heaters
(wash - 5KW, rinse - 12KW) |
|
Water tight top mount controls |
|
Built-In
scrap accumulator |
|
Single and three
phase 208/240 voltage applications for flexible installations |
|
|
MACHINE
MEASUREMENTS:
(Call for details on plumbing/electrical
requirements)
|
|
|
|
Call M-F 7:30am - 4:00pm
(PST) at 503.408.0244
|
|
You may also fax us at
503.408.0343
email us at
cd@commercialdishwasher.net
|
|
©2001 Commercial Warewashing &
Laundry Systems. All rights reserved.
|
|
|
|
SPECIFICATIONS: |
|
|
MODEL
CMA-180 HT
|
USA
|
METRIC
|
WATER CONSUMPTION
|
|
|
PER RACK |
.96 GAL. |
3.6 L |
PER HOUR |
52 GPH |
197 L |
OPERATION CYCLE |
|
|
WASH TIME - SEC. |
49 |
49 |
RINSE TIME - SEC. |
12 |
12 |
TOTAL CYCLE |
61 SEC. |
61 SEC. |
OPERATION
CAPACITY |
|
|
RACKS PER HOUR |
.54 |
54 |
WASH TANK CAPACITY |
8 GAL. |
30.3 L |
WASH PUMP CAPACITY |
68 GPM |
257 LPM |
WATER REQUIREMENTS |
|
|
WITHOUT BOOSTER HEATER |
180 DEG. F |
60 DEG.C |
WITH BOOSTER HEATER |
140 DEG. F |
60 DEG.C |
WATER INLET |
3/4 INCH |
--- |
DRAIN CONNECTION |
2 INCH |
--- |
RINSE PRESSURE SET |
20 PSI |
1.41 KG/CM2 |
OPERATING
TEMPATURE |
|
|
WASH TEMP. |
155-160 DEG. F |
68-71 DEG.C |
RINSE TEMP. |
180-195 DEG. F |
82-90 DEG.C |
FRAME DIMENSIONS |
|
|
DEPTH |
25 INCHES |
63.5 CM |
WIDTH |
25.5 INCHES |
65 CM |
HEIGHT |
.59-60 INCHES |
150-152 CM |
STANDARD TABLE HEIGHT |
34 INCHES |
86.3 CM |
MAXIMUM CLEARANCE FOR DISHES |
15 INCHES |
38.10 CM |
DRAIN CONNECTION OFF OF FLOOR |
11.5-12.5 INCHES |
29-32 CM |
STANDARD DISHRACK |
1 |
1 |
DIMENSIONS |
19.75" x 19.75" |
50 CM x 50 CM |
WASH PUMP MOTOR HP |
1 HP |
1 HP |
ELECTRICAL RATING |
VOLTS |
PHASE |
AMPS |
WITHOUT BOOSTER |
|
|
|
|
|
|
|
WITH BOOSTER |
|
|
|
|
|
|
|
SHIPPING WEIGHT |
|
|
APPROXIMATE |
243 LBS. |
1106 KG |
|